Powered by Blogger.
RSS

You can replace this text by going to "Layout" and then "Page Elements" section. Edit " About "

Releasing Rubber Track on a Mini Excavator

22:46 |



The main advantage of mini excavator tracks is their compact sizes. They can fit in almost all places, especially in cramped situations. Rubber tracks are often fitted to mini excavator to make it run smoothly. Many a times, it becomes difficult to release the rubber tracks skid steer from a mini excavator. Here are some tips that you can follow to make the process easy:

  1. Use the mini excavators bucket to lift the side which needs replacing or removing of tracks. Ask someone to place blocks beneath the machines undercarriage. In doing so, you support the excavator with the blocks, when it is let down. Thus, the track will leave off the ground.
  2. Thereafter, remove grease fittings near track idler. There will be a large wheel in each end of the track. One of them will be the smooth one, called the track idler. Use a wrench and twist the grease fitting in counter-clockwise direction till it gets removed completely.
  3. Use a pry bar to push the track idler to the tracks center. Or even a bucket of the machine will do. When you keep pushing you will notice grease coming out. Keep pushing till the time all grease has been removed. When all grease will get removed the track will start to loosen.
  4. Replace the old track with the new one.
  5. Re-insert grease and tighten the fitting using a wrench.
  6. Apply grease into fittings and push the idler outwards. Add adequate pressure to tighten the new track to the tee.
  7. After that, you need to lift the machine and remove all the wooden blocks. Take the excavator down and drive it back and forth. In case, the track seems sag after moving, all a little bit of more grease till you are satisfied.

Certainly, this process will help you in removing tracks from excavators.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments0
Posted by Henry Cooler
Location: Scammel Street, Campbellfield VIC 3061, Australia

Clean and Drive Your Rubber Tracks Regularly

22:03 |



Construction works require several motor vehicles to carry goods from one place to the other. In order to make driving vehicle smoother rubber tracks are fitted at the bottom of the vehicle. Rubber tracks have made the life of many construction companies easier. They help to drive vehicles on uneven terrains with ease. As rubber tracks for excavators and rubber tracks mini excavator are used at rough and patchy surfaces a considerable amount of dirt remains in the tracks itself. If these go unnoticed and remain back for a long time, it can decrease the life of the tracks. Therefore, they should be cleaned on a regular basis. Again, there is a definite process of removing dirt from rubber tracks. Distinct cleaning methods are to be employed for different types of rubber tracks. For example, each type of rubber pads for excavators requires application of unique liquids and brushes.

It is better to seek professional help when the need to clean rubber tracks arises. However, if you are a self doing person then the “how to use” instructions on the back of cleaning equipments can be of considerable help.

One more point, when a vehicle goes unused for a fair time defects may rear up in its integral parts. Starting the vehicle and driving it is as important as cleaning the tracks are. If your vehicle remains at rest mode for a long time, there are high chances of parts malfunctioning. Therefore, keep in mind to drive your vehicle regularly. In case, the vehicle does not need a run you have still ensure that the engine is kept running everyday as a maintenance duty.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments1
Posted by Henry Cooler

Types of Rubber Tracks You Can Fit

03:16 |



Rubber tracks are immensely helpful. They help to lengthen the life span of your vehicles. Also, they help to run the vehicle smoothly and without much effort. You can easily ensure that the vehicle runs for a longer time, without being interrupted. However, there are different types of rubber tracks to be had. Each variety of rubber tracks for excavators are fit for particular types of excavators or mini excavators. Three of the basic types have been mentioned below:

  1. Bolt-on Pads: These are the easiest type of rubber tracks. They can be directly fitted to the existing steel grouser plates. The plates must be drilled at the right places before starting the fitting work. All you need to do is push the tracks into the drilled holes. Even, a neophyte can fit these into the right place.
  2. Clip-on Pads: These pads are not drilled from before. A certain type of clip is used to tighten the fixings on the ends of the grouser plates.
  3. Chain-on Pads: Here, you would need to use a chain. Bolt directly to the chain. There is no need for grouser plate. These are mainly utilized for machines, needed to work on sealed surfaces.

Apart from these three types of rubber pads, you would get many others in the market. However, these are the long-established types that have been in use since ages. You can get these in a number of patterns and shapes. Now make your steel tracks for excavators or mini excavators last long and make your work easier than ever before.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments1
Posted by Henry Cooler

Buying an Already Used Mini Excavator – Things to Keep In Mind

03:21 |



An excavator machine is very helpful in building and construction works. It helps save time, money and most importantly energy. It helps to move stones, remove trees or stumps, digging and similar jobs that will be cumbersome if done manually. Excavators, on an average are made to deliver 8,000 to 10,000 hours of operations work before any key components are required to be replaced. There is no harm in buying an already used excavator. However, you should keep the following points in mind and then buy the second hand mini excavator.

1.     Get in touch with a company that provides such equipments, because they will be the one who will be able to serve your purpose in the best possible way. If you search properly you will definitely find many equipment rental companies.
2.     Scrutinize the excavator properly. The first thing to check is the tail spin, or amount of space the cab will need when it take turns. Here, you will have to consider the place in which you decide to use the machine.
3.     Thereafter, examine the controls. You are going to operate the machine using those controls. If the controls are faulty the machine will turn useless. Hence, checking if or not the controls of the machine are in workable condition is a must.
4.     After checking the controls thoroughly drag your eyes to the hydraulic system and engine. If access to important parts of the machine would be uneasy then you should start searching for another one.  
5.     It is advisable to buy excavators with deep depth. It will help you dig correctly and your work will be cost effective.

These are some of the points that you can remember while buying mini excavators that have been already used by someone. If you want to buy mini excavator tracks, rubber tracks excavator or rubber pads forexcavators which have been already used; you also have few things to probe that will be discussed in the next blogs.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments1
Posted by Henry Cooler

Rubber Skid Loader Track – Why Choose them?

02:50 |



If you want to use skid loader tracks for skid steer, you have many options to choose form. The varying tracks are used with tired, machines or wheeled. Wheels help in enhancing the performance of the skid steer loader manifolds.  It increases the maneuvering and traction capabilities. From the three choices, you can choose skid loader track for the following reasons.

Rubber Skid Loader Tracks

If your work is in a driveway or a yard, then you should certainly use rubber skid loader tracks. This is so, because rubber skid loader track don’t harm the yard or driveway. Rubber tracks are very less aggressive and they give good grip on wet land. In so doing, they don’t harm newly-laid sod, scrape up brick pathways and scratch up driveways. One can easily turn machines that have been tracked.

Turning a skid steer rubber tracks loader can lead to wear and tear on the driveway or lawn. Hence, you should make use of tracks. In fact, it is better to use rubber pads also.

There are different kinds of tracks to work on. You need to understand that working on them without considering the well being of the track would be of no use. In the near future the tracks would become useless.  There are steel skid loader tracks also, but they create a lot of noise and scratch while spinning. They should be used as aggressive tracks.

There are several companies that provide professional advices regarding usage of track skid loaders.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments1
Posted by Henry Cooler
Subscribe to: Posts (Atom)